SERVICING NOTES
1. Procedure to reprogram the flash memory (IC6003) contained in the digital module
Equipment needed � A PC running MS Windows (Windows 98 Second Edition, Windows 2000 or Windows XP). � A copy of the software �Tiny M2Flash� version 1.07 or higher. � A PWB7359 (version N1 or higher) digital module including the Micronas SDA6000 microcontroller (also known as M2) and the Fujitsu MBM29LV160/BE 1Mx16 bit Flash memory. Operation with other devices is not guaranteed. � A level-converter circuit to make the {+3.3 V, 0} voltages of the RS232 port at the digital module compatible with the {+12 V, -12 V} voltages of the RS232 port at the PC. This circuit can be built around a MAX3222. � A power supply to feed the digital module with 3.3 V. � A RS232 cable for PC (PC-PC Type).
9
Hardware Tiny M2Flash requires the M2 digital module to be connected as shown in figure 18.
