|
|
|
Usuarios conectados
Actualmente hay 5982 visitantes y
15 usuarios online. |
|
Productos
|
|
Información
|
|
Destacado
|
|
|
 |
|
|
No hay comentarios de productos.
32JF-74H
Corner Symmetry Adjust the Corner Symmetry so that the picture is centred. The effect of this adjustment is shown in figure 7. Note: This adjustment affects to upper and lower sides. � When the volume up button is pressed, side pincushion changes from barrel shape to pincushion. � When the volume down button is pressed, side pincushion changes from pincushion to barrel shape. � Press the stand-by button on the remote control to store.
Figure 7
Vertical Linearity Adjust the Vertical Linearity so that the upper and lower parts of the picture are symmetrical. The effect of this adjustment is shown in figure 8. � When the volume up button is pressed, the upper picture scanning decreases and the lower picture scanning increases. � When the volume down button is pressed, the upper picture scanning increases and the lower picture scanning decreases. � Press the stand-by button on the remote control to store. Vertical Angle Adjust the Vertical Angle so that the picture is centred. The effect of this adjustment is shown in figure 9. � When the volume up button is pressed, the vertical angle changes to right. � When the volume down button is pressed, the vertical angle changes to left. � Press the stand-by button on the remote control to store. Figure 9 Vertical Bow Adjust the Vertical Bow so that the picture is centred. The effect of this adjustment is shown in figure 10. � When the volume up button is pressed, the vertical bow changes to right. � When the volume down button is pressed, the vertical bow changes to left. � Press the stand-by button on the remote control to store. Vertical Amplitude Adjust the Vertical Amplitude so that 8% over-scan is achieved. The effect of this adjustment is shown in figure 11. � When the volume up button is pressed, the vertical size of the picture increases. � When the volume down button is pressed, the vertical size of the picture decreases. � Press the stand-by button on the remote control to store. S Correction Adjust the S Correction so that the picture symmetrical between the top, centre and bottom. The effect of this adjustment is shown in figure 12. � When the volume up button is pressed, the top and bottom scanning increases and the centre scanning decreases. � When the volume down button is pressed the top and bottom scanning decreases and the centre scanning increases. � Press the stand-by button on the remote control to store. Figure 12 Figure 11 Figure 10 Figure 8
9
|
|
|
> |
|
