WHIRLPOOL 31315XBW
Manual de Usuario

CLOCK AND OVEN CONTROL

Timer

The display willflash when the appliance is first connected to power or ifpower is interrupted. The display willstop flashing ence the time-of-day clock has been set.

Press this pad to cancel all programming except the clock and timer,

The TIMER can be set from one minute (:01) upto 9 hours and 50 minutes(9:50).Timewill bedisplayedin minutesand not in seconds.The timer does not control the oven. 1. Pressthe TIMER pad. � :00 and the TIMER indicator light will appear in the display. The colon will flash. 2. Pressthe � and � paduntilthe desiredtime isdisplayed. � The timing operation will begin as soon as the time is set. � The flashing colon indicatesthat a timing operation is in progress.The colonwill not flash if the time of dayor oven temperature is displayed. � Thetimer count down will be displayedunless another function is programmed aftersetting the timer. � A single beep signals the end of the operation. "End" will appear in the display. If the time of day or oven temperature is displayed "End" will not appear. � A short beep will sound every 30 seconds to remind you that the operation has completed. � Pressand hold for 3 secondsthe TIMERpad to cancel the beeps. 3. Pressthe CANCELpad and the time of day will reappear in the display. Tocancel the timer operation: Pressand hold the TIMER pad for 3 seconds.

Press and tap or press and to select Hi or Lo broil. desired time, temperature, orhold these pads to enter the

This pad is used to set the oven temperaturefor a bakingor roasting operation. See page 8 for additional information, 1. Pressthe BAKE pad. 2. Pressthe � or � pad to set the oven temperature,

This pad isused to set the ovenfor a broilingoperation.See page 11for additi()nalinformation. 1. Press the BROIL pad. 2. Press the � or � pad to select Hi or Lo broil,

1. If the displayisflashing, pressthe CLOCK padto stop the flashing then press the CLOCK pad again, � The colon will flash for 30 secondsto indicatethat the clock time may be set. � If the colon is not flashing, press the CLOCK pad. � The clock time can not be set if the control is programmedfor a bake, broil or timing operation, 2. Set the correct time of day using the � and � pads. Ifthe�or� padis not pressed within 30 seconds,the program will cancel. Press the CLOCK pad and begin again,

� A beepsoundseachtime a functionpadis pressed.There is no beep for the � or � pad. � The oven will automatically turn off if it is left on for 12 hours and 000 will appear in the display. Press the CANCEL pad and the time of day will reappear in the display. � If a fault code (example: F 2) is displayed and beeps sound, press the CANCEL pad. If the fault code continues,see page 17.