PHILIPS 30PF9946/98
Manual de Usuario

Connect your computer
AV3
L UADIO
HDMI

You may connect your computer to the VGA connector of
AV3 or to the HDMI connector (see further). & Connect one end of a VGA cable 1 to the video card of the computer and the other end to the VGA Y/Pb/Pr

VGA Y/Pb/Pr (2Fh)

R

2 1

2Fh 1 connector at the bottom of the TV. Fix the connectors firmly with the screws on the plug. é In case of a Multimedia computer, connect the audio cable 2 to the audio outputs of your Multimedia computer and to the AUDIO R (right) and L (left) inputs.

The VGA connector allows the following TV and monitor display modes: VGA 640 x 480 60 Hz SVGA 800 x 600 60 Hz XGA 1024 x 768 60 Hz Note: If possible, use the XGA1024x768@60Hz video mode to obtain the best image quality for your 30PF9946 LCD monitor.

To select connected devices

B

& Press the v key repeatedly to select AV1, AV2, AV3, Side or

TV channels, according to where you connected your devices.
é Press the cursor up/down. � Press OK.

v

VCR DVD TV SAT AMP

v
®

SELECT
� �

�
�

TV

PC

HD

º
®

b

®

OK
®

®

Record with your recorder
To record S-VHS quality, connect an S-VHS peripheral directly to the recorder. Record a TV program You can record a TV program using your recorders tuner without affecting your TV.
& Select the channel number on your recorder. é Set your recorder to record.

See the handbook for your recorder. Switching channel numbers on your TV does not disturb recording !

Record a recorder from MONITOR OUT You can record a program on your recorder from the TV tuner via MONITOR OUT. & Switch on the device. é Select the correct channel on your TV and the correct input on your recorder. � Set your recorder to record. You record the tuner channel of the TV, even when you switch to an AV input using the v key on the remote control. Do not switch channels or turn off your TV when you are recording through MONITOR OUT.

8