PHILIPS 28PW6006/05
Manual de Usuario

L01_15624 (GB) 1-1_190705

7/19/05

3:53 PM

Page 4

Quick installation
The first time you switch on the television, a menu appears on the screen and the tuning starts automatically.
Auto Store � Program 2 � TV 470 MHz � ��������������������������������

the search and the number of programs found. At the end of the search, the menu disappears. To exit or interrupt the search, press H. If no program is found, consult the possible solutions p. 12. & If the transmitter or cable network sends the automatic sort signal, the programs will be numbered correctly. In this case, the installation is complete. é If this is not the case, you need to use the Sort menu to number the programs correctly. Some transmitters or cable networks broadcast their own sort parameters (region, language, etc.). In this case, indicate your choice using the î� keys and validate with ¬. * Only on versions equipped with a radio.

If the menu is not displayed, press and hold down the �- and �+ keys on the TV set for 5 seconds to start the tuning. All the available TV programs and radio stations* will be stored. This operation takes a few minutes.The display shows the progress of

Program sort
& Press key H.The Main menu is displayed on the screen.
Mainge � Picture � Sound � Features $ Install

Install � Language � Country � Auto Store � Manual Store $ Sort � � Name

00 01 TF1 02 FR2 03 � FR3 04 C + 05 ARTE

é With the cursor, select the Install menu followed by the Sort menu. � Select the programme you want to move using the î� keys and press ¬. � Then use the î� keys to select the new number and validate with �. ( Repeat steps � and � for each program you wish to renumber. § To quit the menus, press d.

Program name
If required, you can give a name to the programmes and external connectors. Note: on installation, the programs are named automatically when an identification signal is sent. & Press the H key. é With the cursor, select the Install menu, then Name � Use the î� keys to select the programme to name or rename. � Use the �¬ keys to move around the name display area (5 characters) and the î� keys to select the characters. ( When the name has been entered, use the

� key to exit.The name is stored. § Repeat steps � to ( for each programme you wish to name. è To quit the menus, press d.

4