A number display shows from 1~100 the percentage of memory storage progress from the TV to the Wireless Smart-Loader (100 = fully loaded). TV TO SMARTLOADER |||-------- ##
>
When the data transfer is completed, ## is �100�, the following menu appears for 3 seconds: SMARTLOADER READY >
>
Now the Wireless Smart-Loader is programmed and can be used to install other TV sets.
3. Installing a TV with the Wireless Smart-Loader Use a Wireless Smart-Loader programmed with the settings from a master TV of the same type. Be sure to use the same method of programming the Wireless Smart-Loader. It means that if you program the Wireless Smart-Loader using the wireless method, you have to use the same method to install the TV. Turn on the TV and point the Wireless Smart-Loader to the TV�s infra red receiver (distance around 30cm). ---- Press the �MENU� Key on the Wireless Smart-Loader. ° ° Highlight �SMARTLOADER TO TV� Press the right arrow key on the Wireless Smart-Loader for wireless method or on the TV Remote Control for wired method. > A number display shows from 1~100 the percentage of memory storage progress from the Wireless Smart-Loader to the TV (100 = fully loaded). SMARTLOADER TO TV |||-------- ## > When data transfer is completed, ## is �100�, the following menu appears for 3 seconds: TV READY > After that, the following menu comes up GOODBYE > > >
The TV goes to standby now and will start up automatically. Your TV is now installed and ready for use.