Wall mounting
q Fix the drilling template to the wall. q Make 3 � 8mm holes in the wall 2 at points I, 1 as desired at points L. q Insert the three � 8mm expansion plugs into the wall. q Insert 2 5x45 screws at points I but do not tighten them completely. q Adjust the unit so that it is positioned at a right angle to the wall by turning the two support screws G. q Fit the hood into holes I, tighten the 2 screws. q From inside the hood, insert the third 5x45 screw into hole L. � Fig. 5
