TOSHIBA 21A3M/MJ
Manual de Servicio

PROGRAMMING CHANNEL MEMORY
� First, use the ASM (Automatic Search Memory) function to preset all the active channels in your area automatically. Then, arrange the preset channels with the SEARCH (>>>), MFT (Manual Fine Tuning) and AFT (Auto Fine Tuning) functions so that you can tune into only desired channels. � This section shows how to tune in channels using mainly the Remote Controller. You can also perform the system select, ASM, SEARCH (>>>), SKIP, MFT and AFT operations using the buttons on the TV set.

To preset channels (ASM)

To preset channels (Manual search, AFT, MFT)
Manual search (>>>)

ASM (Automatic Search Memory)

1 2 3
SPECIFIC INFORMATIONS GENERAL ADJUSTMENTS

with the position down ( )/up ( ) buttons or the digit/ Select the head of the position number to start the ASM direct select buttons. Press the MENU button repeatedly to call up the SET UP menu on the screen.

1 2 3 4

Select a position number with the position down ( up ( ) or digit/direct select buttons.

)/

Press the MENU button repeatedly to call up the SET UP menu on the screen.

Confirm that �COLOR� is set to �AUTO� and �SOUND� is set to proper system. If not, press the t/s buttons to move the cursor (-) to �COLOR� or �SOUND� and press the �/+ buttons to select each proper system.

Press the t/s buttons to move the cursor (-) to �>>>�.

4 5

Press the t/s buttons to move the cursor (-) to �ASM�. Press the "+" button to start the ASM. All active channels will be stored in the memory automatically. When programming is complete, the initial position number will reappear.

Press the �/+ buttons to start searching. The � button searches for lower-numbered channels; the + button for higher- numbered channels. Repeat this process until you can get the desired channel.

5 6 7

When the desired programme is shown, press the t/s buttons to move the cursor (-) to � �.

After presetting Check the preset channels by pressing the position down ( )/ up ( ) buttons. � If the picture or sound of a certain channel is not good, finetune the channel using the MFT function. � If the colour of a certain channel is abnormal, automatic colour system selection (AUTO) may malfunction, or sound system selection is wrong. In such a case, select another colour and/or sound system.

Press the + button to memorize the channel at the current postion.

When you desire to store another channel at another postion, move the cursor (-) to �POSITION� with the t/s buttons and select a desired position with the �/+ buttons. Then, press the t/s buttons to move the cursor (-) to �>>>� and repeat the steps 4 to 7.

� 18 �