Manual store
This menu allows you to store each programme manually. From the INSTALLATION menu: æ Select MANUAL STORE ( key) and press . The MANUAL STORE menu appears. Ã� Select SYSTEM (according to model). Use the key to select the standard reception, EUR. E (standard DK) or EUR. W (BG). ê Select SEARCH and press .The search begins. As soon as a programme is found, the search will stop. The frequency band is displayed (VHF1, VHF3 or UHF). Use the key to select the frequency band. If no programme is found, refer to the «Tips» chapter (page 8). ® If the reception is not satisfactory, select FINE TUNE and hold down key or to adjust. â� Select PROG. NUMBER and enter the required programme number using the keys or using keys to . Ã� Select STORE and press . The message OK appears.The programme is stored. º Repeat steps ê to Ã� for each programme to be stored. î To exit from the MANUAL STORE menu, press the key several times.
Skip the programmes
This menu allows you to skip programmes which can be accessed using the P keys on the remote control. From the INSTALLATION menu: æ Select SKIP ( key) and press . The SKIP menu appears Ã� Select PROG. NUMBER ( key) and use the keys or keys to to select the programme you wish to skip. ê Select SKIP and use the keys to choose YES to skip the programme or NO so that it remains accessible Only the programmes found during the search are set to NO (all other programmes are set to YES by default). ® Repeat steps Ã� and ê for as many programmes as you wish to skip. â� Press the key 3 times to exit from the INSTALLATION menu. The P keys on the remote control can now be used to access those programmes and EXT sockets which are set to NO in the list. The programmes skipped can always be accessed using keys to .
To exit from the menus ...
Press the key several times.
