PHILIPS 17C2322E
Manual de Usuario

How to Use the On Screen Display (OSD)
Geometry window

Rotation, Pincushion, Trapezoid, Balanced Pincushion, Parallelogram
Follow the steps below to adjust any of the five preset options (ROTATION, PINCUSHION, TRAPEZOID, BALANCED PINCUSHION, or PARALLELOGRAM). You can make individual adjustments to each of the preset options. Note: use these features only

when the picture is not square.

1

Press the ON SCREEN DISPLAY button.

2b

2a

Turn the ROTARY knob until the GEOMETRY window is highlighted. Next, press the ON SCREEN DISPLAY button. Then, if necessary, turn the ROTARY knob until ROTATION icon is highlighted.

Press the ON SCREEN DISPLAY button. Then, turn the ROTARY knob to adjust the rotation.

2c 5a 5b 5c
To select BALANCED PINCUSHION or PARALLELOGRAM, turn the ROTARY knob until BALANCED PINCUSHION or PARALLELOGRAM icon is highlighted. Next, press the ON SCREEN DISPLAY button. Then follow steps 4b and 4c to make the appropriate changes.

When done, press the ON SCREEN DISPLAY button to save the change and return to GEOMETRY window.

3a

To select PINCUSHION, turn the ROTARY knob until PINCUSHION is highlighted. Next, press the ON SCREEN DISPLAY button.

4c

When done, press the ON SCREEN DISPLAY button. This will save the change and return the screen to GEOMETRY window.

4b

Turn the ROTARY knob to adjust the trapezoid.

4a

To select TRAPEZOID, turn the ROTARY knob until TRAPEZOID is highlighted. Icon Next, press the ON SCREEN DISPLAY button.

3c

When done, press the ON SCREEN DISPLAY button. This will save the change and return the screen to GEOMETRY window.

3b

Turn the ROTARY knob (lower center) to adjust the pincushion.

Smart Help
To exit GEOMETRY CONTROLS . . . . . . but continue to another window, press the ON SCREEN DISPLAY button when �SAVE� is highlighted. Next, turn the ROTARY knob until the desired window � for example � SIZE & POSITION � is highlighted. Now, turn to SIZE & POSITION On the next page and follow the instructions, starting with step 2. . . . completely, press the ON SCREEN DISPLAY button twice. The On Screen Display disappears. All changes will be saved. To make changes to one item, follow the steps for that item. Then, follow �To exit GEOMETRY CONTROLS . . . .� To return to factory presets, see �To Reset the OSD� on page 14.

11