PHILIPS 170B1A00
Manual de Servicio

12

180P LCD Go to cover page

OSD Attention signals
ENTERING SLEEP MODE This screen appears when the monitor is about to enter the sleep mode. Please press any key on the keyboard or click the mouse to wake up the monitor and computer.

The monitor will detect various display situation automatically. When the monitor detects the problems, the screen will show the different warning signals to remind you what is happen to your monitor. NO VIDEO INPUT This screen appears if there is no video signal input. Please check that the signal cable is properly connected to the video card of PC.

ATTENTION ENTERING SLEEP MODE

ATTENTION NO VIDEO INPUT

VIDEO INPUT SELECTED This windows appears 3 seconds that show you which video input has selected by monitor when every time you turn on the monitor.

THIS IS BEST PICTURE SHARP When you expand picture size by using OSD menu �ADJUST SIZE/USER SETTINGS�, during the adjustment, Once the pixels number of horizontal size has reached 1280 pixels, following window will appear on the screen that remind you the resolution of video signal was expanded exactly can match the LCD panel (1280X1024).

ATTENTION
ANALOG VIDEO INPUT SELECTED USE OSD MENU TO CHANGE DEFAULT INPUT SELECTION

ATTENTION
THIS IS BEST PICTURE SHAPE

CANNOT DISPLAY THIS VIDEO MODE.. This screen warns when the input frequency from the computer is not a standard video mode or out of the monitor's scanning range. Please change the display mode of the operating software in the computer(i.e. Windows) to 1280 x 1024@ 60Hz for best display results.

WAIT FOR AUTOMATIC ADJUSTMENT This screen appears when you touch the button. It will disappear when the monitor is properly adjusted.

ATTENTION
WAITING FOR AUTOMATIC ADJUSTMENT

ATTENTION
CANNOT DISPLAY THIS VIDEO MODE, CHANGE COMPUTER DISPLAY INPUT TO 1280 X1024@60HZ 91.1 KHz 85.0Hz

In this case, the picture will still showing on the screen about 60 seconds then shut down by monitor. Attention message will disappear as well after 30 minutes remaining then enter power saving state. (No picture, power indicator showing amber.)

SECOND VODEO IS NOT AVAILABLE When you select video input between Analog or Digital signal via INPUT SELECTION function of OSD menu, if the one you are selecting is not available, following message will appear on the screen then switching back to the previous setting automatically.

ATTENTION
USE 1280 X 1024 FOR BEST RESULT This message appears at the top of the OSD window when the video mode input is not the recommended 1280x1024. Other modes may result in some picture distortion. Please adjust the video mode to 1280x1024 at 60Hz for best display quality.

SECOND VIDEO NOT AVAILABLE

USE 1280 x 1024 FOR BEST RESULT

Back

Forward