PHILIPS 150MT10P00C
Manual de Servicio

TV OSD Menus
Using other menus (With remote controller)

150MT10P LMT
Go to cover page

7

1.First carry out operations 1 to 8 above, then: 2.Press once to select AUTO STORE then press . The

search begins. After several minutes, the INSTALL menu Reappears Automatically. 3.If the transmitter or the cable network broadcasts the automatic sort signal, the programmes will be correctly numbered. 4.If not, the programmes found will be numbered in descending order starting at 99, 98, 97, etc. Use the SORT menu to renumber them. Some transmitters or cable networks broadcast their own sort parameters (region, languages, etc.). Where this is the case, make your choice using the keys And confirm with .To exit or interrupt the . search, press the MENU key. 5.To exit from the menus, press

Choosing a language and country Manual tuning

1.Press the MENU key to display the main menu. 2.Select INSTALL 3.Press , then press . The INSTALL menu This menu allows you to store the programmes one by one. 1.Press MENU. 2.Select INSTALL ( ), then press . The INSTALL menu appears. . The menu appears: appears. The LANGUAGE option is activated. to go into the LANGUAGE menu. keys. 4.Select your language with the 5.Press

3.Select MANUAL STORE ( ) then press

The menus will appear in the chosen language. to exit the LANGUAGE menu. . keys. 6.Select the option COUNTRY and press 7.Select your country with

4.Press to go to the SYSTEM menu. Use to choose EUROPE (automatic detection*) or manual detection with WEST EUR (standard BG reception), EAST EUR (standard DK Reception), UK (standard I reception) or France (standards LL'). Then press to exit from the menu.

If your country does not appear in the list, select OTHER. 8.Press to exit the COUNTRY menu. . 9. To exit from the menus, press

* Except for France (standard LL'): select the option FRANCE. 5.Select SEARCH and press . The search begins. As soon as a programme is found, the search will stop. If you know the frequency of the programme required, enter its number directly using the 0, 9 keys and go to step 7. 6.If reception is un-satisfactory, select FINE TUNE and hold down or key. 7.Select PROG. NO (programme number) and use the to 9 keys to enter the desired number. 8.Select STORE and press The programme is stored. 9.Repeat steps 5 to 8 for each programme to be stored. To exit: press the key. . The message STORED appears. or 0

Automatic tuning
This menu allows you to automatically search for all the programmes available in your region (or on your cable network).