PHILIPS 14PV182/58
Manual de Usuario

2.

PLAY BACK
Tape position/Index search
I

1 Insert a cassette into the cassette slot. 2 Press the GPLAY play back button. 3 Picture search: Now press the
H

(rewind) or

(wind) button once or several times.
4 Interrupt: Press the
STOP h

Tape position: If you press the OK button the tape position will be shown in the display during Wind, Rewind, Record, Play back and Pause/Stop. Index search: Every time you start to record, the tape is

button.
H

5 Wind: Stop the tape and press the
I

(rewind) or the

marked with a code mark.
1 Press the
INDEX E

(wind) button.
J

button. Press the
H

I

button to

6 Eject: Press the

button on the set.

select the next code mark or the previous code mark.

button for the

Note: Some functions switch off automatically after a while (e.g.: Pause, Still Picture, Scanning). This helps to protect the cassette and prevent unnecessary power consumption. * With this set you can play back cassettes that have been recorded on another TV combi in the NTSC standard. * If you load a cassette with erase protection, the TV combi starts the play back automatically. * The picture quality is affected during scanning. The sound is switched off. * Remove the cassette before transporting the TV Combi.

2 Once the TV Combi finds the code mark or unrecorded

area it will automatically switch to play back. Note: When you press any tape transport button (e.g.: the H or I button) this search function will be stopped. * You cannot use this function with recordings made on another video recorder that does not have this function.

Eliminating picture interference
1 During playback press the
MENU

button.

Still picture
1 Press the

2 Select and confirm the �SPECIAL� line. 3 Select the �TRACKING� line.

button. You see a still picture. Interference stripes will appear. Each time you press the STILL R button again the picture will move on one step.

STILL R

4 Press the

or quality is at its best.
MENU

D

C

button until the playback

5 Press the

button. This setting will remain until you remove the cassette.
MENU

Continuous playback
1 Press the
MENU

6 Cleaning function: Press the

button.

7 Select and confirm the �SPECIAL� line.

button.
8 Select the �CLEANING� line. 9 Press the
OK

2 Select and confirm the �SPECIAL� line. 3 Select the �REPEAT PLAY� line. Switch on the continuous

button. A blue screen appears for a few

seconds.
0 Wait until the blue screen disappears and press the

playback.
4 Press the
MENU

button.

MENU

button.

5 Start the continuous playback with the GPLAY playback

Note: * Some hired cassettes may have a poor picture/sound quality. This is not a fault in your set.

button.
6 If you want to cancel the function, stop the continous

playback in the �REPEAT PLAY� line.

4