PHILIPS 14PV182/05
Manual de Usuario

&

Programming with �VIDEOPlus+�
All the information required for programming is encoded in the �VIDEOPlus+� code. 1 Press the SV/V+ button on the remote control.
2

How to enter, check or clear a TIMER-block manually
1 2 3 4

Press the TIMER k button. Select a free TIMER block or the TIMER block you want to check or clear. Clear: Press the
CLEAR b D

Enter the entire �VIDEOPlus+ code�. This code (up to 9 digits) is found next to the start time of a TV programme in your TV guide. If you entered an incorrect code number, clear it with the CLEAR b button. If you want to repeat programming at daily or weekly intervals, select the required settings in the �DAILY/WEEKLY� line. �Daily� programming can only be used for recordings to be made from Mondays to Fridays inclusive. After confirming the corresponding data appears on the TV screen.

button. or
B C

Enter/Check: Press the Press the
A

button to switch between �DATE� (date), �DW� (daily, or the
MENU 0-9

weekly), �PR� (programme number), �START� (start time) and �END� (end time). and the buttons to change the data.
5 6

3

To end programming, press the Press the
STANDBY m

button.

button.

4

Selecting a TV channel
Select the required TV channel (= programme number) with the buttons on the remote control.
Pp

Note: If you use VIDEOPlus+ for the first time, the �PROGRAMME NR.� line appears when you enter the VIDEOPlus+ code. Enter the required programme number.

button or the

0-9

The selected programme number (e.g.: �P 01� ) appears in the upper right corner of the TV screen.

DATE DW PR START END 01 01 17:15 18:45

d

Volume control
You can control the volume level with the
Sp

button.
MUTE y

If you want to mute the sound temporarily (e.g.: during a telephone call), press the

button on the remote control. When you press it again, the sound returns at the same volume level.
v w x y 0-9 5 OK

Picture control
You can control brightness, contrast, sharpness and colour here. 1 Press the MENU button.

Confirm with the

OK

button.

The data has been stored in a TIMER block. Please ensure that you loaded a cassette without erase protection.
6

2 3

Select and confirm the line �PICTURE� . Select and confirm the TV screen setting.

Press the

STANDBY m

button.

* In addition, you can adjust the tint for the playback of cassettes in the NTSC standard.