TOSHIBA 14N41B
Manual de Usuario

Connect Peripheral Equipment
There is a wide range of audio and video equipment that can be connected to your TV. The following connection diagrams show you where the different equipment should be connected at the back or the front side of the TV.

Connect a decoder without an aerial socket to the TV � Connect the decoder to your TV with a Scart cable / RCA Cable to EXT. / RCA Jack. When your decoder has a Scart / RCA Jack you can obtain better picture quality if you connect a Scart cable / RCA Cable to EXTERNAL /RCA Jack.

Via the SCART
Your TV set has one Scart socket. If you want to connect peripherals (e.g. video, decoder, etc.) which have Scarts, to your TV, use EXT. in-

TV and Video Recoder (VCR)
� Connect the Video Recorder to the ANT (antenna input) socket of the TV with the aerial cable. � Connect the Video Recorder to the EXT. terminal with the Scart cable, or connect it to the F-AV (Front AV) terminal with the audio and video cables.

put.

If an external device is connected via Scart socket TV is switched to AV mode automatically. If the signal is RGB then the RGB OSD indicator is displayed on the screen.

RGB mode
If your equipment can output RGB signals, connect it to the AV-1 (EXT.) terminal. � Select the RGB mode to watch images from that equipment.

Playback NTSC
the back of the TV.

Connect NTSC VCR player to Scart socket at

or, Connect NTSC VCR player to RCA Jack at the front of the TV. Then, press RGB. button to select AV-1, F-AV, or

Via Ant Input
If you want to connect to your TV, peripherals like video recorders or decoders, but the device you want to connect does not have Scart, you should connect it to the ANT input of your TV set. If the VCR is connected via antenna input, we suggest you use Programme 0.

Search for and store the test signal of the video recorder
(ANT.) of your video recorder.

� Unplug the aerial cable from the aerial socket � Switch on your TV and put the video recorder on the test signal. (See the handbook for your video recorder.) � Enter the Tuning menu via the Install menu. � Search for the test signal of your video recorder in the same way as you searched for and stored the TV signals. See Tuning, Search and Store TV channels. Store the test signal under programme number 0. � Replace the aerial cable in the aerial socket (ANT.) of your video recorder once you have stored the test signal.

Decoder
Cable TV offers you a wide choice of programs. Most of them are free, others are to be paid for by the viewer. This means that you will need to subscribe to the broadcasting organisation whose programmes you wish to receive. This organisation will supply you a corresponding decoder unit to allow the programmes to be unscrambled. For further information ask your dealer. See also the booklet supplied with your decoder. Connect a decoder with an aerial socket to the TV � Connect the aerial cable.

Camera and Camcorder
To connect to Front-AV input (F-AV) Connect your camera or camcorder at the front side of your TV. ENGLISH - 17 -

IB-ENG-TOSHIBA-14N41B-1710UK-AK36-50074451.p65 17

31.03.2006, 17:48