(7) REVERB TYPE/EFFECTS selector
x When bank A is selected with the BANK switch:
x When bank B or C is selected with the BANK switch:
(8) BANK switch
Selects one of the three effect banks (A, B, C). A bank is a group of related effects. Bank A contains reverb type effects and banks B and C contain modulation and multi-effect settings.
Selects the reverb type.
Selects the effect type from each bank. For each bank, 11 settings are available, resulting in a total of 33 reverb and effect types.
s Rear Panel
(4)
(3)
(2)
(1)
ZOOM STUDIO
MODEL
SERIAL NO. ZOOM CORPORATION
EFFECT ON/OFF
1201
POWER DC9V 300mA FS01 R L R L/MONO INPUT
MADE IN JAPAN/FABRIQU� AU JAPON
OUTPUT
(1) INPUT jacks
Serve for connection to the sound source, such as the send jacks of an instrument or mixer. Mono sources should be connected to the L/MONO jack and stereo sources to both jacks (L/MONO for left channel and R for right channel).
Note: A preamplifier (such as integrated in a mixer) or a compact effect device is required when wishing to use the 1201 with an instrument with low output level, such as an electric guitar or bass, or with a high-impedance instrument (470 kilohms or higher).
(2) OUTPUT jacks
Serve for connection to the return jacks of an instrument or mixer, or to recording/playback equipment.
(4) DC INPUT jack
The cable from the supplied AC adapter is connected here.
Note: When the AC adapter is plugged into an AC outlet, the 1201 is automatically turned on.
(3) EFFECT ON/OFF jack
The optional foot switch FS01 can be connected here, for switching effects on and off with your foot. When effects are off, only the original sound is heard and the front- panel LED indicator flashes in orange.
